User Manual

TIMER – TIMER SYSTEM
The XP9303 contains a Timer System that includes three timers. One is an integrated timer that
keeps track of total time that the TX has been on for the model and it is displayed on the Main
display. The other timer can be configured as either a Countdown timer or as a Stopwatch. This
timer also appears on the Main display when active and can be started, stopped and reset from
the Main display. It is a good idea to use the Countdown timer as a reminder that it is time to
land so as not to run out of fuel.
INTEG-T
0:00
Function
Name
Integrated Timer.
Press CLR button to
reset.
TIMER
INH
Model Number
[TIMER]
MODEL 15
Timer Status
ENT
LIST
CLR
Model Number – (Trainer)
This is the presently selected model number. It is for information purposes only and
cannot be changed.
Timer Status – (Timer)
The Timer Status defaults to INH. To select either the Count Down or Stopwatch timer,
highlight and select INH and then select the desired timer.
When the Count Down Timer is selected, a time of 10:00 appears below the label.
Highlight and select the time in order to change the starting time for the Count Down
Timer.
Once either the Count Down or Stopwatch timer is active, it appears on the Main
Display.
Integrated Timer – (Timer)
The integrated Timer keeps track of the total transmitter ON-Time for the current model
number. When highlighted, a message appears at the bottom of the display saying to
Push [CLR]=0:00. The Integrated timer can be reset by pressing the CLR button while
the time under INTEG-T is highlighted.
CLR Button – (Timer)
Pressing the CLR button while the Count Down timer time is highlighted resets the time
back to 10:00. Pressing the CLR button when the Integrated Timer time is highlighted
resets the Integrated timer to 0:00.
LIST Button– (Timer)
JR XP9303 Detailed Function Descriptions 92