User Manual

CLR Button – (Trainer System)
Pressing the CLR button will reset all channels to MAST.
LIST Button – (Trainer System)
Press the LIST button to return to the FUNCTION List, or rotate the rotary selector until
LST appears next to LIST and select it to return to the SYSTEM Menu.
ENT Button – (Trainer System)
Pressing the ENT button returns to the Main Display.
USING THE XP9303 FOR TRAINING – (Trainer System)
1. Connect the Trainer cord between the Master and Slave transmitters. Turn the power on
to the Master transmitter (the Slave TX remains powered off and can even have the
module removed).
2. Make sure the Slave TX is in the PPM/FM modulation mode. See MODULAT in the
SYSTEM Menu if the Slave TX is a XP9303 or refer to the owners manual if the TX is not a
XP9303.
3. Highlight and select Trainer in the FUNCTION List to obtain the Trainer Display.
XP9303 USED AS MASTER (INSTRUCTOR) – (Trainer System)
1. If the XP9303 is being used as the Master TX (the TX operated by the instructor), select
the channel(s) that are to be transferred to the Slave TX (TX operated by the student)
when the trainer switch is depressed.
When all channel selectors are in the MAST position, NORMAL appears on the display
and all 4 channels are transferred to the student when the trainer switch is depressed.
If only certain channels are to be transferred to the student, highlight and select the
channels that are to be transferred, moving the indicator for these channels to the SLAV
position for these channels. When less than all channels are selected as SLAV,
PROGRAM T appears on the display indicating that the Trainer System has been
programmed to transfer only selected channels to the Slave TX.
The XP9303 is now ready to be used as the Master or instructor TX. Depress the Snap
Roll button to transfer control to the student. Control will remain transferred until the
Snap Roll button is released.
XP9303 USED AS SLAVE (STUDENT) – (Trainer System)
1. If the XP9303 is to be used as the Slave TX (TX used by the student), be sure that the
currently selected model is set to PPM Modulation (see MODULAT in the SYSTEM Menu
if the Slave TX is a XP9303).
2. Highlight and select MASTER and the display will switch to SLAVE. A message will
appear instructing to Connect DSC & POWER off. Make sure the TX power switch is in
the Off position and the DSC cord is connected between the 2 transmitters.
The XP9303 is now ready to be used as the Slave or student TX.
JR XP9303 Detailed Function Descriptions 91