User Manual
TRAINER – TRAINER SYSTEM
The XP9303 incorporates a Trainer System that allows the instructor to transfer some or all of
the primary flight control functions (Throttle, Aileron, Elevator and Rudder) to the student. It
also allows for indicating if the transmitter (TX) is to be the Master (controlled by the instructor)
or Slave (controlled by the student). The Snap Roll button is used to transfer control to the
student when the XP9303 is being used as the Master/Instructor transmitter.
[Trainer]
ENT
LIST
CLR
THRO AILE ELEV RUDD
Ch
SLAV
MAST
Function
Name
Channel Status
SLAV or MAST
Legend - Upper=Slave
Lower=Master.
MASTER NORMAL T.
Trainer Mode –
Master or Slave
Training Type –
NORMAL or
PROGRAM
Channels
Trainer Mode – (Trainer System)
3. The Trainer mode may be Master or Slave and indicates the role that the transmitter will
play during training. To change modes, highlight and select MASTER and it will toggle
between MASTER and SLAVE.
When changed to SLAVE a message appears instructing to Connect the DSC Cord
between the transmitters and to turn the SLAVE transmitter OFF. Only the Master
transmitter should be powered on when training.
Training Type – (Trainer System)
The Training Type may be either NORMAL or PROGRAM. It will be NORMAL when
all 4 channels are designated as Slaves. As soon as one or more of the channels are
designated as a Master, the Training Type changes to Program indicating that the settings
are different than the default settings of all channels being Slaves.
Channels – (Trainer System)
Each of the 4 channels may be designated as a Master or Slave. The Channel Status
beneath each channel indicates whether or not the channel will continue to be controlled
by the Master transmitter (Mast) or if it is to be transferred to the student (SLAV).
Channel Status – (Trainer System)
There are 4 channels that can be transferred to the student or Slave transmitter – Throttle,
Aileron, Elevator and Rudder. The status of each channel is shown beneath each
channel. If the status is MAST, the instructor maintains control of the channel and it is
NOT transferred to the student. If the status of a channel is SLAV, it is transferred to the
student when the snap roll button is depressed.
JR XP9303 Detailed Function Descriptions 90