User Manual
3. Verify that the top model is the model that is to be backed-up and the lower model is
empty or contains a model that is no longer required. When satisfied that all is well,
press the CLR button on the left side of the display next to COPY. The entire
contents of the currently selected model is copied to the lower model on the display
and there is now a complete backup of the current model. The upper and lower
model memory names are now the same because the 2 model memories are now
identical in every regard.
The backup copy can now be used to restore the original at any time by performing
the Copy function and reversing the order of models where the backup is copied into
the original.
MDL Name – Model Name
Each model should be given a name to make it easy to identify in the model memory list and to
identify the current model on the Main Display screen. The model name appears in the upper
right hand corner of the Main Display when the TX is switched on.
[MDL Name]
MODEL 15 ACRO < > SPCM
Function
Name
Model Memory #
That is to be
named
Cursor – shows where next
letter will be inserted. Move
it with Rotary Selector
Modulation Type
of Current Model
ENT
LIST
CLR
Model Memory Number
This is the currently selected model that is to be named.
Cursor
This triangle shows where the next character in the name is to be placed. It can be moved
right/left using the rotary selector. Once in position for the next letter in the name, press
the rotary to obtain a list of characters that can be inserted into the model name.
Modulation Type
This is the modulation type of the currently selected model.
JR XP9303 Detailed Function Descriptions 9