User Manual

Throttle Used As Switch – (Multi-Point Mixer)
The throttle stick may also be used as a switch to turn the mixer On and Off. It can be
used by itself or in conjunction with one or more switches.
To use the throttle as a switch, highlight and select THRO STK. Then use the rotary to
dial-in a throttle stick percentage/position where 1 = lowest throttle position and 100 =
full throttle position. The throttle trim does not affect the setting.
When the throttle stick is below this setting the mixer will be turned on and when above
this setting the mixer will be turned off.
CLR Button – (Multi-Point Mixer)
Pressing the CLR button while a modifiable parameter is selected will reset the parameter
to its default value.
NOTE: Pressing the CLR button when either the Master or Slave is highlighted Inhibits
the entire mixer and it is no longer functional.
LIST Button – (Multi-Point Mixer)
Press the LIST button to return to the FUNCTION List, or rotate the rotary selector until
LST appears next to LIST and select it to return to the SYSTEM Menu.
ENT Button – (Multi-Point Mixer)
Pressing the ENT button returns to the Main Display.
TO INHIBIT A MIXER (TURN IT OFF ENTIRELY)
Highlight either the Master or Slave and press the CLR button to completely disable a
mixer.
JR XP9303 Detailed Function Descriptions 85