User Manual
0 1 2 3 4 5 6
ENT
LIST
CLR
[
PROG.Mix1
]
SW SELECT
Point-2
INH
THRO EXP
Point-3
0
STK INH OFF
Point-4
INH
IN 50 OUT 0
Point-0
Point-1
Point-5
IN
Point-6
-100
INH
H
+100
Master Channel
List. # Entries
indicate bypassing
D/R & Ex
p
settin
g
s.
THRO THRO
Master
Channel
THRO AILE ELEV RUDD GEAR
FLAP AUX2 AUX3 AUX4 #THR
#AIL #ELE #RUD LTRM LLVR
RTRM RLVR SNPT CANCEL
Slave Channel – (Multi-Point Mixer)
This is the Slave channel that will move according to the program mix in relation to the
Master channel. The default for both the Master the Slave channel is THRO.
The Slave channel is selected by highlighting and selecting this parameter to obtain a list
of channels and then selecting the Slave channel from the list. The list contains each of
the 9 channels in the system and in some instances, a few others.
NOTE: If a Dual Channel has been assigned to Flaps, two additional selections appear
in the list of available Slave channels – they are FPRN and FROL. FPRN represents the
Flaps where both flaps will move as a result of the mixing (Flaps move up/down
together). FROL also represents the Flaps but causes the Flaps to move in unison with
the ailerons – the Right Flap will travel in the same direction as the Right Aileron and the
Left Flap will travel in the same direction as the Left Aileron. It has the effect of turning
the Flaps into ailerons to dramatically increase authority in the roll axis.
Function
Name
Slave
Channel
ENT
LIST
CLR
Throttle used
as switch to
turn mixer O
& Off
n
0 1 2 3 4 5 6
[
PROG.Mix1
]
SW SELECT
THRO THRO
Master
Channel
THRO EXP
STK INH OFF
IN 50 OUT 0
Point-0
Point-1
Point-2
Point-3
Point-4
Point-5
Point-6
-100
INH
INH
0
INH
INH
+100
Current
Point
setting
Point
Names/
Numbers
Master
Channel
Position
Slave
Channel
Position
Exponential
ON/OFF
P
o
int
s
Th
a
t
Ca
n B
e
A
djus
t
ed
Cursor – Moves
with Master
Channel.
Currently at
neutral.
Offset=0
Graph showing
mixing curve. X-
axis = Master
Travel, Y-
axis=Slave Travel
C
curve is defined
urve/Line – the
by the values
set for the 7
points
Select Switch
to turn mixer
On & Off
JR XP9303 Detailed Function Descriptions 82