User Manual
COPY – Model Select
The Copy function is part of the Model SEL function described above and allows the contents of
the current model memory to be copied into another model memory in the same transmitter. It is
not used to transfer the model to another transmitter or to a DataSafe unit – the TRANSFER
function provides for these activities.
The Copy function is very valuable because it can provide some insurance against losing
programs (aircraft setups) that may have been time consuming to create. It is strongly
recommended that the Copy function be used to make a backup copy of the model memory for
safekeeping after programming for a model has been completed, tested and refined.
Making a backup copy of the model memory protects against losing the original program and
also allows experimentation with the original program, knowing that the original settings can be
restored by copying the backup copy back to the original model memory.
Select Model SEL on the SYSTEM Menu to obtain the Model Selection display and then
highlight and select Select to change it to Copy.
ENT
LIST
CLR
[Model SEL]
Co
py
MODEL 15 ACRO SPCM H9 EXTRA 330S
Function
Name
Copy Function.
Select To toggle
Between Select &
Copy
Model Memory # That Will Receive The Copy
Of The Currently Selected Model. It Will Become
The Backup Copy
MODEL 10 ACRO SPCM
Co
py
Press The CLR
Button To Begin The
y Of The Curr
Model To The
Selected Model
Memory
Cop ent
Current Model to
Be Copied
Copy Function
Indicates the Copy mode. Selecting this parameter toggles between Copy where a model
can be copied and Select where a model is selected as the current model.
Current Model To Be Copied
Indicates the currently selected model. It is the model that will be copied (source) and its
contents will not be disturbed by the copy function. If a different model is to be copied it
must first be selected as the current model as described in Model Select above.
Model Memory # That Will Receive The Copy
This is the model memory that will receive the copy (destination) of the currently
selected model. It will become the backup copy. The contents of this model memory
will be erased and replaced by the contents of the currently selected model. Therefore
JR XP9303 Detailed Function Descriptions 7