User Manual

[GYRO SYS. ]

UX2: AX2 SW

ENT

LIST

CLR

CEN 0: 0% END 0: 50% FM0: S

1: 50% 1: 50% FM1: S

1: 50% 1: 0% FM1: S

2: 90% 2: 50% FM2: S

CEN 0: 0% END 0: 0% FM0: S

2: 90% 2: 0% FM2: S

AUX3: AX2 SW

STICK INH

STICK

ELEV

Stick Override Percentages. Normally

set to 0% to represent that gyro gain

goes to 0% as the stick is moved to full

deflection.

Stick Override Percentages. Default to

50% but should be changed to 0% to

represent that gyro gain goes to 0%

as the stick is moved to full

Aux Channel Controlling Gain – (Gyro System)

This parameter may be AUX2 or AUX3 and represents the Auxiliary channel that is to

control the gyro gain. The channel must have been set to GYRO in the Devic.SEL

function before it will show up on the Gyro System display.

CLR Button – (Gyro System)

Pressing the CLR button while a modifiable parameter is selected will reset the parameter

to its default value.

LIST Button – (Gyro System)

Press the LIST button to return to the FUNCTION List, or rotate the rotary selector until

LST appears next to LIST and select it to return to the SYSTEM Menu.

ENT Button – (Gyro System)

Pressing the ENT button returns to the Main Display

JR XP9303 Detailed Function Descriptions 66