User Manual

Highlight and select Pos.0 to toggle between the Pos.0 and Pos.1, in order to display
and adjust the 2 curves. This only needs to be done if multiple throttle curves are
being set up.
Note: If Twin Engine is active the Pos.0 will appear as RTH.0
ENT
LIST
CLR
Pos.0
L 1 2 3 4 5 H
[
THRO CURV
]
0
SW SELECT
IN 50 OUT 50
Point-L
Point-1
Point-2
Point-3
50.0%
Point-4
Point-5
Point-H
0.0%
INH
INH
INH
INH
100.0%
FM0 FM1 FM2 AIL GER RUD MI
X
POS1
POS0
Available Flight Modes and Switches that can be
used to switch between throttle curves.
0.0%
INH
INH
50.0%
INH
INH
100.0%
Point-L
Point-1
Point-2
Point-3
Point-4
Point-5
Point-H
0
L 1 2 3 4 5 H
ENT
LIST
CLR
SW SELECT
THRO EXP
STK INH OFF
Pos.0
Pos.1
[
THRO CURV
]
Highlight and
select POS.0 to
obtain a list of
throttle curves
2. Select Pos.0 or Pos.1 to identify which throttle curve is to be displayed and adjusted
(select Pos0 if only 1 throttle curve is desired). If the Twin Engine function (Twin E.)
has been activated, there will be 4 possible throttle curves: RTH.0, RTH.1, LTH.0,
and LTH.1 representing Pos.0 and Pos.1 throttle curves for the right and left engines.
Highlight and select RTH.0 on the display to obtain a list of throttle curves. Select
the curve that is to be displayed/programmed.
ENT
LIST
CLR
Pos.0
L 1 2 3 4 5 H
[
THRO CURV
]
0
SW SELECT
THRO EXP
STK INH OFF
Point-L
Point-1
Point-2
Point-3
Point-4
Point-5
Point-H
0.0%
INH
INH
50.0%
INH
INH
100.0%
RTH.0
RTH.1
LTH.0
LTH.1
Highlight and select
RTH.0 to obtain a list of
rottle curves when Twin
Engine is active in Wing
TYPE
th
JR XP9303 Detailed Function Descriptions 54