User Manual

Function
Name
ENT
LIST
CLR
Pos0: L 0% Pos1: L 0%
R 0% R 0%
Position 0
Mix Values
Switches that can switch
between Pos0 & Pos1
values
[
AIL RUD M
]
Position 1
Mix Values
0-L
Position –
changes
from 0 to 1
when
switch is
moved
Direction –
changes
when
Aileron
stick is
moved
from L to R
FM0 FM1 FM2 AIL GER RUD MIX
POS1
POS0
THRO
STK
20
Throttle can
also be used
to switch the
mix on and
off.
CLR Button – (Ail to Rudder Mix)
Pressing the CLR button while a mix value is selected will reset the value to 0%.
LIST Button – (Ail to Rudder Mix)
Press the LIST button to return to the FUNCTION List, or rotate the rotary selector until
LST appears next to LIST and select it to return to the SYSTEM Menu.
ENT Button – (Ail to Rudder Mix)
Pressing the ENT button returns to the Main Display.
To Set Up an Aileron to Rudder Mix.
1. There are 2 sets of mixing values available. If the Pos.0 values are left at 0% then the
mixer may be turned on and off – Pos.0 will be OFF and Pos.1 will be ON. This can
also be reversed so that Pos0 is ON and Pos1 is OFF by leaving Pos1 values at 0%
and setting percentages in the Pos0 values. Keeping the Pos1 values at 0% and
setting percentages for the Pos0 values is useful when using the throttle stick to
control the mixer in conjunction with other switches.
Highlight and select L next to Pos0 and set the value to give the desired amount of
Rudder travel when full Left Aileron is applied. The direction of rudder travel can be
changed by using negative (-) values versus positive (+) values.
2. Highlight and select R next to Pos.0 and set the value to give the desired amount of
Rudder travel when full Right Aileron is applied. The direction of rudder travel can
be changed by using negative (-) values versus positive (+) values.
3. Scroll down to the bottom line of the display to select the Flight Mode and/or switch
that will be used to turn the mixer on and off. The throttle may also be used to turn
the mixer on and off by highlighting and selecting THRO STK and setting the
percentage of throttle to the point where the mixer is switched on/off.
JR XP9303 Detailed Function Descriptions 49