User Manual

TRVL ADJ. – TRAVEL ADJUST
Travel Adjust, sometimes referred to as ATV, is used to adjust how far a servo travels in each
direction. After the linkages have been installed and the servos are moving in the proper
directions, adjust the amount of servo travel in each direction for each servo. For more
information on Servo Travel and Mechanical Advantage please refer to the Sub Trim Usage and
Mechanical Advantage article contained in the Glossary
Highlight and select TRVL ADJ. in the Function List to obtain the Travel Adjust display.
Function
Name
Travel Values & Directions
[TRVL ADJ.]
THRO H 100% L100% GEAR +100% -100%
AILE L 100% R 100% FLAP U100% D100%
ELEV D100% U100% AUX2 +100% -100%
RUDD L100% R100% AUX3 +100% -100%
AUX4 +100% -100%
Channels
ENT
LIST
CLR
Channels – (Travel Adjust)
The abbreviations for all 9 channels are included on the display and they are named
according to any special assignments that have been made. For example, if Flaperons are
activated the 6th channel which is normally named FLAP is renamed to LAIL to
represent Left Aileron. No more guessing what channels are being used for dual controls
or other special assignments.
Travel Values & Directions – (Travel Adjust)
The current Travel in each direction is displayed for each servo. To adjust the Travel for
a particular channel, highlight and select the channel using the rotary selector. Then
move the stick, switch or lever in one direction to adjust the travel in that direction. Then
move the stick, switch or lever in the other direction and adjust the travel in that
direction.
CLR Button – (Travel Adjust)
Pressing the CLR button while a travel value is selected will reset the travel to 100%.
LIST Button – (Travel Adjust)
Press the LIST button to return to the FUNCTION List, or rotate the rotary selector until
LST appears next to LIST and select it to return to the SYSTEM Menu.
ENT Button – (Travel Adjust)
Pressing the ENT button returns to the Main Display.
JR XP9303 Detailed Function Descriptions 43