User Manual

ManualsBrandsJR ManualsHobby9303 Synthesized Air R790, No Servos

If Flight Modes were activated in the Devic.SEL function and D/R was set to FM in the same

function, there will be 3 sets of D/R EXP values displayed for Elevator, Aileron, and Rudder as

shown in the illustration below. The 3 sets of D/R EXP values correspond to the 3 Flight Mode

switch positions FM0, FM1, and FM2.

Regardless of whether there are 2 or 3 sets of values, setting the Dual Rate and Exponential

percentages is the same.

[D/R & EXP]

Function

Name

When Flight Modes are Active and

the D/R parameter is set to FM in

Devic.SEL, there are 3 Flight Mode

switch positions – FM0, FM1, FM2

ENT

LIST

CLR

ELEV

F.M.0

D/R

100%

EXP

LIN

F.M.1

Flight

Mode

Switch

Positions;

0, 1, 2.

Exponential

Percentages for

3 Flight Modes

Dual Rate

Percentages

for 3 Flight

Modes

ELEV –

Indicates

Elevator

settings.

Select to

change to

AILE or

RUDD

Switch Position. Can

be 0, 1, 2. It changes

when the Flight Mode

switch is moved

Graph Illustrates the D/R

F.M.2

& EXP settings. 45 deg.

Line represents no EXP

or Linear response.

Graph appears when

D/R or EXP percentages

are highlighted

ELEV – (D/R & EXP)_

This parameter identifies the channel for which the Dual Rates and Exponential settings

are being displayed and set. Use the rotary selector to highlight and select this parameter

to change between Elevator, Aileron, and Rudder.

Switch Positions for Normal D/R Switches – (D/R & EXP)

These 2 parameters (Pos-0 & Pos-1) identify each of the Dual Rate switch positions. The

corresponding D/R and EXP settings are directly to the right of the switch position name.

Flight Mode Switch Positions – (D/R & EXP)

These 3 parameters (F.M.0, F.M.1, and F.M.2) identify each of the Flight Mode switch

positions. The corresponding D/R and EXP settings are directly to the right of the switch

position name. These parameters appear only when Flight Modes have been activated in

the Devic.SEL function and D/R is set to FM in the same function.

F.M.0 settings are associated with the Flight Mode switch in its Upper position while

F.M.1 and F.M.2 correspond to the Flight Mode switch in its Mid and Lower positions

respectively.

Dual Rate Percentages – (D/R & EXP)

There are 2 D/R percentages for each switch position, allowing a separate value for each

stick direction: Up/Down & Left/Right. This is useful in obtaining the same aircraft

feel/response in all directions.

JR XP9303 Detailed Function Descriptions 39