User Manual

TO CHANGE A SWITCH ASSIGNMENT

1. From within the Devic.SEL function use the rotary selector to highlight and select

GEAR, FLAP, AUX2, AUX3, or AUX4 along the top line of the display.

2. Once a switch is selected a list of available replacement switches is displayed.

Highlight and select the desired switch with the rotary selector.

3. Repeat for as many switches as desired

FLAP TRIM ON/OFF – Devic.SEL

The digital FLAP TRIM lever is located next to the FLAP switch. It may be activated or

inhibited in the Devic.SEL function by using the rotary selector to highlight either ON or OFF

and pressing the rotary to toggle between these two values.

Channels

OFF

TRIM

GEAR FLAP AUX2 AUX3 RUDD

SW SW SW LEV D/R

GEAR FLAP AUX2

UX3 AUX4

[Devic.SEL]

Function

Name

Remainder of

display left

blank for clarity

ENT

LIST

CLR

FLAP Trim Status. Select to

toggle between On and OFF.

Usually set to OFF

NOTE: Ordinarily this switch should be turned OFF, even if the aircraft has flaps or flaperons

because the system provides other means of controlling flaps and disabling this switch will help

prevent an out-of-trim condition if Flaperons are used and the trim lever is accidentally moved.

JR XP9303 Detailed Function Descriptions 29