User Manual

SWITCH ASSIGNMENTS – Devic.SEL
The XP9303 Provides the ability to change the standard default switch assignments for GEAR,
FLAP, AUX2, AUX3, AND AUX4. Changing the assignments may be a matter of preference or
to help overcome a disability in one hand. In any event, the standard switch assignments may be
changed in Devic.SEL function contained in the SYSTEM Menu.
To obtain the Switch Assignment display, highlight and select Devic.SEL in the SYSTEM Menu.
Channels. To change the switch that controls a
channel, select the channel and then select one of the
switches that a
pp
ears in the list
GEAR FLAP AUX2 AUX3 RUDD
SW SW SW LEV D/R
GEAR FLAP AUX2 AUX3 AUX4
[Devic.SEL]
Function
Name
R
emainder of
the display left
blank for
clarity
ENT
LIST
CLR
Switches that control channels.
Channels
Each of the channels that are controlled by switches and levers are listed across the top of
the display. Beneath each channel is the present switch assignment.
Switches That Control Channels
The present switch assignment for each channel is shown directly beneath each channel
name. The switch assignment for a channel can be changed by highlighting and selecting
the channel above it and choosing another switch from the list of available
switches/levers. The example shows available switches in a box that can operate the
GEAR channel, including the GEAR switch which is currently selected.
Channels. To change the switch that controls a
channel, select the channel and then select one of the
switches that a
pp
ears in the list
GEAR FLAP AUX2 AUX3 AUX4
GEAR FLAP AUX2 AUX3 RUDD
SW SW SW LEV D/R
AIL D/R AUX2 SW
ELE D/R FLAP SW
RUD D/R GEAR SW
MIX SW SNAP SW
[Devic.SEL]
Function
Name
R
emainder of
the display left
blank for
clarity
ENT
LIST
CLR
Available switches that can be used to
control the GEAR channel. List obtaine
d
b
y selecting GEAR on the top line. Selec
t
the desired switch.
JR XP9303 Detailed Function Descriptions 28