User Manual

D/R:SW – (Flight Modes)
The D/R:SW parameter may be toggled between SW and FM by pressing the rotary selector
when SW or FM is highlighted. If left in the SW mode then the 3 separate Dual Rate
switches will be used to select Dual Rates and Exponential settings for elevator, ailerons, and
rudder and there will only be 2 sets of Dual Rates/Expo settings for each control. If FM is
selected, the Flight Mode switch will be used to select Dual Rates/Expo settings for all three
controls at once (Elev, Aile, Rudd - D/R settings ganged together on the Flight Mode switch)
and there will be 3 sets of D/R/Expo values available for each control.
If individual D/R switches (3 switches) to control only 2 sets of rates and curves for elevator,
ailerons and rudder are desired set this parameter to SW. If 3 sets of rates and curves that are
selectable by a single Flight Mode switch are desired then set this parameter to FM. This
setting may be changed at any time by returning to this display.
JR XP9303 Detailed Function Descriptions 27