User Manual
ACRO - SYSTEM MENU - ADVANCED FUNCTIONS
There are two functions in the SYSTEM Menu that govern some of the more advanced features of the
XP9303 system. They are the Devic. SEL and Wing Type functions.
The Devic. SEL function is used to activate and inhibit Flight Modes; change switch assignments;
Activate and Inhibit the Flap and Gyro Systems; Activate and Inhibit switches/channels and to
Activate/Inhibit the FLAP TRIM lever that is next to the FLAP switch on the TX.
The Wing Type function is used to indicate the wing type (Normal, Flaperon, Delta); to indicate if the
aircraft is a V-tail configuration; and to identify any Dual channels for primary flight controls (ELEV,
AILE, RUDD, FLAP). It also provides for a 2
nd
throttle channel complete with independent trim and
throttle curves to accommodate twin-engine aircraft.
Each of options in these two functions is described in detail below.
Devic.SEL – Device Select (Flight Modes, Switch Assignments, Activate/Inhibit Switches)
The Devic. SEL function is used to Activate/Inhibit Flight Modes, Flap and Gyro Systems, and
the Flap Trim lever. It is also used to Activate/Inhibit switches/channels.
Access the Device Select function by selecting Devic.SEL from the SYSTEM Menu.
[Devic.SEL]
Function
Name
GEAR FLAP AUX2 AUX3 AUX4
GEAR FLAP AUX2 AUX3 RUDD
SW SW SW LEV D/R
FLIGHT MODE
OUT ACT SYS. ACT ACT ACT
TRIM ON
Channels
Switches that
control channels
FLAP
Trim
Status
INH
Flight
Mode
Status
ENT
LIST
CLR
Switch/
Lever
Status
Channels
Each of the channels that are controlled by switches and levers are listed across the top of
the display. Beneath each channel is the present switch assignment.
Switches That Control Channels
The present switch assignment for each channel is shown directly beneath each channel
name on the top line of the display. The switch assignment for a channel can be changed
by highlighting and selecting the channel name and choosing another switch from the list
of available switches/levers.
JR XP9303 Detailed Function Descriptions 22