User Manual

TRANSFER – Transfer a Model Memory To/From another XP9303 or DataSafe Unit
The TRANSFER function is used to copy the contents of a model memory to another XP9303
transmitter or to a DataSafe unit connected to a Personal Computer (PC). It is also used to
receive data for a model either from another XP9303 transmitter or from a DataSafe unit.
To obtain the Transfer function, select TRANSFER from the SYSTEM Menu.
TRANSMIT A MODEL FROM THE XP9303
Function
Name
MODEL 15 ACRO SPCM EXTRA 300S
TRANSMIT indicates the XP9303
is to transmit the model to another
XP9303 or DataSafe. Select this
parameter to toggle between
Transmit and Receive
Message flashes
until the DSC Cord
back of the TX
is connected to the
TRANSMIT
Connect DSC & Power of
f
[TRANSFER]
ENT
LIST
CLR
TRANSMIT
Indicates that the TX is in the Transmit mode where the contents of the current model
memory will be transferred TO another XP9303 TX or to a DataSafe unit. Selecting this
parameter toggles between TRANSMIT & RECEIVE.
The message "Connect DSC & Power" off appears until the DSC cord is plugged into the
back of the TX and the TX is powered-off.
LIST Button
Press the LIST button to return to the list of functions in the SYSTEM Menu, or rotate
the rotary selector until LST appears next to LIST and select it to return to the SYSTEM
Menu.
ENT Button
Pressing the ENT button returns to the Main Display. Once the Main Display is
obtained, the TX will need to be powered-off and then powered back on while holding
the ENT button to get back to the SYSTEM Menu.
JR XP9303 Detailed Function Descriptions 15