User Manual

Function
Name
TO RESET A MODEL MEMORY
1. In the SYSTEM Menu, highlight and select MDL Reset using the rotary selector.
2. Press the CLR button that is next to RES on the display.
3. Press the lower-most button next to YES on the display to reset all data for this
model.
MODULAT – Modulation Type – SPCM/PPM
The Modulation function is used to specify the type of receiver that is being used for the aircraft.
It may be either SPCM (PCM) or PPM (FM). It must match the receiver type in order for the
system to function correctly. If SPCM is being used, the Fail Safe function becomes available in
the FUNCTION List.
The Modulation display is obtained by selecting MODULAT. In the SYSTEM Menu.
LST
ENT
LIST
CLR
Press the NO
button next to
RES/CLR to
Cancel the Reset
operation
NO
YES
Are
y
ou sure?
Press the button
next to YES to
Continue with the
Reset operation
Message Flashes
while waiting for
an answer
(YES/NO)
Function
Name
MODEL 15 ACRO EXTRA 300S
Modulation
SPCM
[MODULAT.]
MODEL 15 ACRO SPCM EXTRA 300S
[MDL Reset]
ENT
LIST
CLR
Modulation
change
Modulation Type
Selector. Select to
Current
Modulation Type
Current Model
JR XP9303 Detailed Function Descriptions 13