User Manual

MDL Reset – Model Reset
The Model Reset function is used to return all of the data to the factory defaults for the currently
selected model. When setting up a new model it is important to reset all parameters to their
default or factory settings before proceeding with any other programming. This is to ensure that
there are no program mixes, trims or other "surprises" left over from a previous model or
programming session.
The Reset function is obtained by selecting MDL Reset in the SYSTEM Menu.
Function
Name
Model Memory/
Model Type/
Modulation Type/
Model Name That
is to be Reset
LST
ENT
LIST
CLR
Press the button
next to RES/CLR
RES
to Reset the Model
MODEL 15 ACRO SPCM EXTRA 300S
[MDL Reset]
Model Memory
This is the Model Memory that will be Reset. All data for the model will be reset to
factory defaults when the Reset operation is completed.
RES - Reset Button
Press the button next to CLR/RES to begin the Reset operation. A new display is
presented asking for confirmation of the Reset operation.
LIST Button
Press the LIST button to return to the list of functions in the SYSTEM Menu.
ENT Button
Pressing the ENT button returns to the Main Display. Once the Main Display is
obtained, the TX will need to be powered-off and then powered back on while holding
the ENT button to get back to the SYSTEM Menu.
JR XP9303 Detailed Function Descriptions 12