User Manual

[MDL Name]
MODEL 15 ACRO < EXTRA 3 > SPCM
Function
Name
Cursor – shows where next letter will
be inserted in model name. Move it
with the rotary selector. Then press
rotary to obtain character list.
! ” # $ % & ‘ ( ) * + , - . / 0 1 2 3 4 5 6 7
8 9 : ; < = > ? @ A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z
[ ¥ ] ^ _ a b c d e f g
h I j
K L M N O P Q R S T U V W X Y Z { | } ~
ENT
LIST
CLR
Next Character to be inserted into Model Name.
Highlight with rotary selector and press rotary to insert
character into name.
Next Character
Highlights the next character that is to be inserted into the Model Name. The character
will be inserted at the location indicated by the cursor. Use the rotary selector to
highlight the desired character and then press the rotary to insert the character into the
Model Name.
After the character is inserted, the character list disappears. Move the cursor to the next
position in the Model Name and press the rotary to obtain the character list again. Repeat
the process until the Model Name is complete.
If a character is to be replaced in the Model Name, position the cursor under the character
and press the rotary to obtain the character list. Select the character and it will replace the
existing character.
LIST Button
Press the LIST button to return to the list of functions in the SYSTEM Menu, or rotate
the rotary selector until LST appears next to LIST and select it to return to the SYSTEM
Menu.
ENT Button
Pressing the ENT button returns to the Main Display. Once the Main Display is
obtained, the TX will need to be powered-off and then powered back on while holding
the ENT button to get back to the SYSTEM Menu.
TO ENTER A MODEL NAME
1. In the SYSTEM Menu, highlight and select MDL Name using the rotary selector.
2. Press the rotary selector to obtain a list of available characters.
Highlight and select the desired character to form the model name. After the
character is selected, rotate the rotary selector to position the cursor where the next
character is to be placed and press the rotary to obtain the character list again. Repeat
until the model name is completed.
JR XP9303 Detailed Function Descriptions 10