User Guide

JPL-Element-X500 USER GUIDE
Attaching the headband
To attach the microphone boom
arm to the headband, align the
triangle shape on the microphone
boom arm with the triangle shape
on the headband and push to
clickintoplace.Themicrophone
boom arm will then rotate to your
requiredposition.
Detaching the headband
To detach the microphone boom arm from the
headband, gently push the microphone speaker from
insidetheearcushion.Thiswillpopthemicrophone
boomawayfromtheheadband.
DO NOT pull on the microphone boom
to remove it from the headband.
Align
Positioning the Microphone
30mm
Themicrophoneboomarmisexible,soyoucan
gently bend the boom and position it to suit the
curveofyourface.
The ideal position for the microphone is at the corner
ofthemouthapproximately30mm(2ngerwidth)
awayfromthemouth.
Microphone Boom Volume Control
Down Up
Mute
Mute /
Speaker Volume
HookOn/O
Answer / End
a call
In-use / busy
indicator
Tochangethespeakervolume:rollthevolume
switchtowardsthe‘plus’signtoincreasethe
volumeandrolltheswitchtowardsthe‘minus’
sign to reduce the volume and press the switch to
activatethemicrophonemutemode.
Connecting the Base Unit to your Desk Phone
DC Jack AUX Port
Handset Port
Telephone Port
• Plug the supplied telephone cord into the TEL port of the base unit
• Connect the other end of the telephone cord to the HEADSET port of the desk phone
Desk Phone with Headset Port
• On the desk phone, unplug the handset cable from the phone
• Plug the handset cable into the HANDSET port on the base unit
• Plug the telephone cord into the TEL port on the base unit and plug the other end of the
telephone cord into the HANDSET port on the desk phone
Compatibility Switch
• Select‘1’or‘2’untiladialtoneisheardviathetelephoneconnection
Desk Phone without Headset Port
Operating Instructions
Pairing a headset to the base unit:
1) Taketheheadsetothebaseunit
2) Make sure there is no power to the base unit
3) Place the headset on the base unit
4) Pluginthepowercordtothebaseunitandthe‘GREEN’TELlightwillash.
Now the base station is in pairing mode
5) Pressthe‘mutebutton’ontheheadsetfor2-3secondsuntilthe‘BLUE’
indicatorlightontheheadsetstartstoash(indicatingpairingmode)
6) Duringpairing,thebasestation’s‘GREEN’lightwillashandthe‘BLUE’lightontheheadsetwillash
7) Whenpairinghassuccessfullycompleted,thereisaconrmationbeeptoneontheheadset’s
earpiecespeaker.Thenbothlightswillstopashing.
Pairing a second headset to a base station:
1) Oneheadsetshouldalreadybepairedtothisbaseunit,ifsoitneedstobeturnedo
2) Toturntheheadseto,rstlytakeitothebaseunitandpressthecallaccept/rejectbuttonto
deactivate the green phone light on the base unit
3) Hold the call accept/reject button for 3 seconds, you should hear a short beep and then a longer
beepsignifyingtherstheadsetiso
4) Followthestepsin‘Pairingaheadsettoabaseunit’abovetoconnectthesecondheadset
5) Oncethesecondheadsetisconnectedturntherstheadsetbackonwithashortpresstothecall
accept/reject button
6) Testtheheadsetsbycallingthephonesystemconnectedtothebaseunitandeachheadsetshouldring.
Please note: Pairing two headsets to one base unit allows each headset to answer the incoming call,
(amaximumofveheadsetscanbepairedtoonebaseunit)however,onlytheperson(therstto
answerthecall)willbeabletohearandinteractwiththecaller.
Base Unit
Mute
Compatibility
Switch
Please note: Your JPL-Element-X500 is supplied paired to the base unit straight out of the box.
However,ifaerchargingtheheadset,the‘GREEN’TELlightdoesn’tactivatewhentheheadsetis
removedfromthebaseunit,thenyoushouldfollowtheseinstructions.
This headset will auto congure to your desk phone.
The compatibility switch should be used in the alternative position, if no dial tone is heard in the headset
whenactive.Itwilltakeupto3minutesforthephoneandheadsettoestablishtheoptimumcallquality
withourAutoSetupfeature,ensuringthebestsound.Simplymakeatestexternalcallandtheheadsetwill
conguretotherequiredsettingsforyourphone.
IMPORTANT AUTO SET UP NOTICE