Owner's Manual

ManualsBrandsJOYTECH HEALTHCARE ManualsHealth MonitorsWrist-Type Fully Automatic Digital Blood Pressure Monitor

Table Of Contents

Unit Operation

System Settings

With power off, press button to actuate system setting .The

Memory Group icon flashes.

1. Secect memory Group

"M1 "

" "

Wile in the System Setting mode you may accumulate test rescuts into 2 diffterent

groups. This allows multiple users to save individual test results ( up to 150 memories

per group). Press button or to choose a group setting. The test results

will automatically store in each selected group.

"M2 " button

13 14

8. Save Settings

While in any setting mode, button to turn the unit off. All

information will be saved.

press " START/STOP "

Applying The Wrist Monitor

Do not apply over clothing. If wearing a long sleeved shirt,

be sure to roll sleeve back to forearm.

Apply monitor to wrist as illustrated. Tighten cuff firmly as

not to wiggle.

Note: Unit will automatically save all information and shut off if left idle for 3 minutes.

Unit Operation

2. Time/Date setting

Press button again to set the Time/Date mode. Set the year first

by adjusting the button or . Press button again to

confiom curret month. Continue setting the day, hour and minute in the same

way. Every time the " " button is pressed, it will lock in your

seletion and continue in succession ( month,day,hour minute12/24 hours)

" "

"M1" "M2"button " "

Quick Start

4. Sit in a comfortable position and place wrist level with heart.

(See Figure D)

5. Press " START/STOP " button to start testing. (See Figure E)

Figure D

Battery Installation

Slide battery cover off as indicated by arrow.

Install 2 new AAA alkaline batteries according to polarity.

Close battery cover.

Note:

1) Replace batteries when Low Battery Indicator " "

2) Batteries should be removed from device when not in

operation for an extended period of time.

appears on screen.

5. Voice Setting

Press button to enter voice setting mode. Set the " "

voice format ON or OFF by pressing the button or ." M1 " button" M2 "

6. Volume Settings

Press button to enter volume setting mode. " "

Set the voice volume by adjusting the . button or button" M1 " " M2 "

Smaller is for lower volume. There are six volume levels." "

3. Time Format Setting.

Press " "button again to set the time format mode.Set the time format by

adjusting the "M1" button or "M2" button .EU means European Time US means U.S Time.

4. Unit Setting.

Press " "button again to set the unit.Set the unit by

adjusting the "M1" button or "M2" button.

7. Settings of cuff keeping level with heart

Press button to enter . " " Settings of cuff keeping level with heart Set the

ON or OFF by pressing the button or

button.

Function of cuff keeping level with heart " M1"

" M2"

Figure E

(

4-0.8 )