Owner's Manual

Unit Operation
Unit Operation
Unit Operation
Unit Operation
System Settings
With power off, long press button 3 second to actuate system setting .The
Memory Group icon flashes.
1. Secect memory Group
"MEM "
" "
Wile in the System Setting mode you may accumulate test rescuts into 2 diffterent
groups. This allows multiple users to save individual test results ( up to 150 memories
per group). Press button to choose a group setting. The test results will
automatically store in each selected group.
3. Time Format Setting.
Press " "button again to set the time format mode.Set the time format by
adjusting the "MEM" button .EU means European Time US means U.S Time.
11
13 14
12
15
6. Save Settings
While in any setting mode, button 3 second to turn the unit off. All
information will be saved.
long press " "
Applying The Wrist Monitor
Do not apply over clothing. If wearing a long sleeved shirt,
be sure to roll sleeve back to forearm.
Apply monitor to wrist as illustrated. Tighten cuff firmly as
not to wiggle.
Note: Unit will automatically save all information and shut off if left idle for 3 minutes.
Unit Operation
16
2. Time/Date setting
Press button again to set the Time/Date mode. Set the year first by
adjusting the button. Press button again to confiom
curret month. Continue setting the day, hour and minute in the same way.
Every time the " " button is pressed, it will lock in your seletion and
continue in succession ( month,day,hour minute12/24 hours)
" "
"MEM" " "
Quick Start
1-2c
m
''
(
0.
4
-0.8 )
3. Sit in a comfortable position and place wrist level with heart.
(See Figure D)
4. Press " " button to start testing. (See Figure E)
Figure D
Figure E
Charge The Battery
The device has a built-in lithium battery, must be to use
specified AC adapter to charge the device.please plug in the adapter
for charging when low battery indicator " " appears on screen.
The screen will display " " during charging.
Note:
if the lithium battery is not charged in time, or if the lithium battery is left for too long,
there may be a situation where the lithium battery is about to run out.
In this case, the device is not power on,When this happens,the lithium battery
should be charged immediately.
Note:
the following rules must be observed during use:
1、Prevent lithium battery from entering water.
2、Can't heat lithium battery, can't throw lithium battery into fire.
3、Cannot use lithium battery for a long time in an environment exceeding 60 °C.
4、The device can only use the lithium battery specified by the manufacturer.
5、Use specified AC adapter to charge the device.
4. Unit Setting.
Press " "button again to set the unit.Set the unit by
adjusting the "MEM" button .
5. Settings of cuff keeping level with heart
Press button to enter . " " Settings of cuff keeping level with heart Set the
ON or OFF by pressing
the " MEM " button.
Function of cuff keeping level with heart