FEDERAL CO COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection.
Section 2 Features 3 —— L. Sustained 3D Performance . 2. 3D Visual Enhancements 3.3 Graphics Texturing Enhancements 4. 2D Graphics Performance and Video Architecture 1). High Speed 64-bit 19g MHz Gur accelerator, 2. Upton 800MB / second memory bandwidth, 3). Up fo 1600 x 1200 in 8 pit color at 75 Hz ang 1024 x 768 in 8/16/24 bit colors at 85 Hz refresh fate. 4). Integrate 24-bit 170 MHz RAMP AC, 5). Confirms to VASE monitor DDC2E interface which Compatible with Windows g5 plug and play. 6).
een, Full Frame Rate Video Acceleration, 10}. Low — Cost Software OVD : 24fp + Hollywood Content 5. OS and Driver Support 1). Direct * 5.0. 2). Opening. 3). GDI. 6. Full AGP Support 1). Windows * 45 2). Windows NT* 4.0. 3). Windows * 98. 4). Windows NT* 5.0. Section 2.
Section 4. Hardware Installation 6 Before installing the device please s installed at the factory. at you have taken ante of the static The device will settings correspond and th check that the memory options electricity precautions. 4-1.
Section 4. Hardware Ingratiation 8 5. Find a free AGP expansion slo in your system. 6. Remove the metal cover plate from the slot you have chosen and put the screw to one side. 7. Align the AGP slot connector with the expansion sot in our PC and gently lower and push the board into the free soil. 8. Secure the board to the expansion slot with the screw your removed from the metal plate. 9. Replace the cover on your system and plug in the power cord. 10.
Sections. Software Installation 10 5. Click on [Star] Menu. (Figure 1) 6, Choose the| Settings, and open the Control Panel, (Figure 1) 7. Double Click on Display icon.
Sectarian. Software Installation 12 10. Click on ave Disk. {Figure 5) 11.
I EEE——— Section. Software Installation 18 Directer We recommend you to is tali Direct X 5.0 to get a better performance under some Direct 3D games. 5-2. Windows NT 4.0 A. Driver Installation If you are first time to start windows NT 4.0, please select Vea Mode] from boot menu, 1. After you login the Windows NT 4.0, the default display are standard VGA mode, now you need to install the i740 AGP to active the driver. 2. Click on [star Menu. (Figure 1) 3.
Sections. Software installation 18 5. Mace the mouse pointer to Display: y Type, and click on it. (Figure 3) 6. You will find now the NT 4.0 set default display types as VGA Compatible Display Adapter]. 7. Click changeling button.
16. Under [0 reties (Figure 11) 16.Click on the [Yes] button. (Figure 12) {Figure 11) Sa splay Properties) Menu, just click onf Apply button, the system . (Figure 12) Section.
