INSTRUCTION MANUAL PatioWicker Sofa IF YOU PURCHASED THE CHAIR ONLINE AND HAVE ANY QUESTIONS OR CONCERNS PLEASE CONTACT US WITH EMAIL OR TEXT EMAIL: hiwarrantyservice@outlook.
WARNING: Proper use of the chair is for single person seating only.The chair is not to be used for standingpurposesandwillnotfunctionasastoolorstep-ladder.Useonevensurfaces only. Chair tested for use at weight of 225lb (102.06kg) per seat. Improper use of this product or failure to use as directed may result in injury. Not intended for commercialuse. IMPORTANT: Pleasereadalltheinstructionsandwarningsbeforeassembling.
1. Attach two chair backs (C) to each other and two front aprons (E) to each other with 5 washers (H) and 5 screws (G) by using allen wrench (I). Do not tighten all screws now. 2. Secure chair arms (A&B) to assembled chair back (C) with 4 washers (H) and 4 screws (G) by using allen wrench (I). Do not tighten all screws now.
3. Secure assembled front apron (E) to chair arms (A&B) with 4 washers (H) and 4 screws (J) by using allen wrench (I). Do not tighten all screws now. 4. Secure seat panel (D) to assembled chair back (C) and assembled front apron (E) with 12 washers (H) and 12 screws (L) by using allen wrench (I). Do not tighten all screws now.
5. Secure chair leg (M) to seat panel (D) with 4 washers (H) and 4 screws (K) by using allen wrench (I). Fully tighen all screws now. 6. Put cushion (F) onto sofa and it is ready to use now. Email: hiwarrantyservice@outlook.
