ALL WEATHER WICKER 3PC GLIDER SET ASSEMBLY INSTRUCTIONS IF YOU PURCHASED THE CHAIR ONLINE AND HAVE ANY QUESTIONS OR CONCERNS PLEASE CONTACT US WITH EMAIL OR TEXT EMAIL: hiwarrantyservice@outlook.
GENERAL BEST PRACTICE FOR ASSEMBLY: Read all instructions before starting Clear a flat covered space to begin assembly Always best to do it with a friend Note that hardware required is provided for every step Pay attention to orientation Letter of the part corresponds to a sticker on the product Number of the hardware corresponds to its letter in the package Helpful hints provided along the way Retain these assembly instructions for future reference. WARNINGS: WARNINGS: Use the correct bolts as indicated.
PARTSPARTS LIST Part No. Part Qty 1 Chair Back 2 Image LIST: Part No.
PRODUCT FRAME MAP 1 R3 L3 R4 2 L4 R5 L5 6 7
STEP 1 STEP 1 PART REQUIRED: L3, R3, L4, R4, L5 & R5 8 Keep the bolts loose. 13 X8 X8 8 13 R5 R4 R3 Note: After assembled, keep all the threaded holes inwards. STEP 2 STEP 2 13 12 PART REQUIRED: 6, 7 X8 X4 Keep the bolts loose.
STEP 3 STEP 3 PART REQUIRED: 1 & 2 11 Keep the bolts loose. 13 X2 X2 2 10 1 11 13 STEP 4 STEP 4 PART REQUIRED: L3, R3 & 2 Keep the bolts loose.
STEP 5 PART REQUIRED: 2, L4, R4, L5 & R5 10 Keep the bolts loose. 13 X6 X6 R5 R4 2 10 13 STEP 6 PART REQUIRED: 2, 6 & 7 9 Keep the bolts loose.
STEP 7 PART REQUIRED: 16 & 17 Finished! 16 17 Caution: To ensure one's safety during use of this swivel glider, make sure that all of the bolts are completely tightened. The chair has the ability to swivel and glider; therefore use by young children should be under adult supervised. Warranty One-year limited warrantly. Proof of purchase (dated register receipt) is required for warranty claims. It remains the customer's responsibility for freight and packing charges to and from the service center.
PARTS LIST PARTS Part No. Part Qty 1 Table Top 2 3 Image LIST: Part No. Part Qty 1 8 Short Bolt (M6x15mm) 8 Table Leg 4 18 Long Bolt (M6x28mm) 4 Table Tray 1 13 Washer 12 Image Tool Tightening Loosing STEP 1 PART REQUIRED: 1 & 2 Keep the bolts loose.
STEP 2 STEP 2 PART REQUIRED: 1, 2 & 3 Tighten all bolts by using the supplied Tool. 13 18 X4 X4 2 2 2 3 2 18 1 13 STEP 3 STEP 3 Email: hiwarrantyservice@outlook.
