JOW ORR USER MANUAL I JOY OR Electric Scooter Please read this instruction manual scooter fully! This instruction manual contains important safety matters! Do not use the electric scooter until vou fully understand the performance of the scooter! Please keep this instruction manual properly!
JOY OR Electric Scooter Please read this instruction manual scooter fully! This instruction manual contains important safety matters! Do not use the electric scooter until you fully understand the performance of the scooter! Please keep this instruction manual properly! Contents I . List of Main Components and Parameters of Products a.Main Components b.Parameter Table II. Safety Instructions for Use II. Operation instruction a.Fold and Expand b.Riding Operation c.How to Charge IV. Product Maintenance V.
I. List of Main Components and Parameters of Products a.l Main Components(Ref.
a.2 Main Components(Ref.
a.3 Main Components(Ref.
II. Safety Instructions for Use 1. This product is an electric scooter for adults, is limited to one person, and do not scooter others at the same time. Minors must use it under the supervision of adults. Please wear safety helmets and other protective equipment when riding this product. Please do not ride this product in unsafe or illegal places such as motorways. Please practice in the open space first, and drive after skillfully controlling.
b.Riding operation On/oft Gear switch Throttle handle Gear Indication Speed indication Multiple Indication Area/Mileage Indication Battery Level Indicator USB charging interface POH E (1) Press the instrument startup key for seconds, the speed gear automatically defaults to the first gear. In order to be safe, the default setting of this product is non-zero starting. Before you can start riding.
(6) Fault Code ERR 1: Motor Failure ERR 2: Handle Failure ERR 3: Controller Failure ERR 4: Power-off brake handle ERR 5: Under voltage Protection ERR 6: Communication failure, instrument can't receive controller output ERR 7: Communication failure, controller can't receive instrument output c.How to charge Open the charging hole rotation protection sleeve and insert the charger output connector into the charging hole on the body. Plug the charger input plug into the supply socket (AC110V-220V).
Brake: This product adopts the braking mode of front disc brake and rear drum brake. Usually, more attention should be paid to check the thickness of brake friction plates. If there is serious wear, it should be replaced in time to prevent adverse consequences caused by braking. Battery: when you get the electric scooter for the first time, please charge the battery and use it.If the vehicle is not used for a long time, it must be charged at least once a month.
Whats app: +86 134 8692 8696 After sale email: If you have any questions please contact our after-sales department, we will give you an answer within 24 hours (except holidays) —JON OR
