User's Manual

Problem Possible Cause Solution
There is static,
distortion,
interference, etc.
There is feedback
(squealing noises).
Batteries are low or
improperly installed.
AC adapters are not connected
or electrical outlet is out of order.
There maybe be interference
from other electrical equipment.
The receiver is out of range
from the camera.
Units are on different channels.
The camera and receiver
are too close to each other.
Volume is too high.
Check or replace batteries.
Check connections or change
to another electrical outlet.
Change the channel
on both units.
Bring units closer together.
Make sure both units are
on the same channel.
Move them farther apart.
Decrease volume level on receiver.
11