User's Manual

cameras. Please refer to the Automatic Channel Scan section on page 7.
8. Use the buttons on the right side of the receiver to adjust the brightness.
9. Turn the volume dial on the left side of the receiver to the desired level.
SPECIAL FEATURES
Receiver LCD Power Option: Battery-Saving Feature
You can turn the screen of the receiver off and still maintain the sound monitor function. To
use this function, slide the LCD Power switch on the receiver to the OFF position. The use
of this feature will prolong the life of the batteries in the monitor when powering the monitor
with batteries only.
Automatic Infrared Night Vision
The infrared night vision function is designed to allow the camera to pick up images even
when the room is dark. Using the built-in light sensor, the camera will automatically convert
to night vision when the level of light is low. Remember, when using infrared night vision,
the image will be in black and white.
Automatic Channel Scan
Your monitor can operate with two cameras. The Automatic Channel Scan function lets you
automatically scan between both channels if two cameras are being used at the same time.
(If you have Model #TV900, please call us at 1-800-430-0222 to find out where you can
purchase an additional camera.) To activate this feature, set one camera to channel A and the
other to channel B. Turn on the Automatic Channel Scan function by pressing the Channel
Selection button on the receiver until the green Auto Scan Indicator lights up. When this feature
is on, the receiver will scan through the two channels automatically. It will stop at each
channel and display the image and monitor the sounds from each camera for approximately
five seconds. To deactivate the auto scan feature, press the Channel Selection button again.
7