User's Manual

Automatic Infra-Red Night Vision

The infra-red night vision feature of the camera allows it to pick up

imagery during darkness or periods of very low levels of light. This

function will switch on automatically when the level of light is low.

During this time a black and white image will be displayed on the

monitor and only objects within 6 ft/2 m will be seen on the monitor.

MONITOR OPERTATION

Power ON/OFF

Use the volume and ON/OFF switch on the side of the unit to turn on the

unit.

Channel Selection

Press the Channel Switching Button at the front of the monitor to select a

channel with optimized clear image and sound. Channels are indicated by

LED lights labeled with letters A or B.

Automatic Channel Scan

Selecting this option allows the Monitor to scan between both channels

automatically, stopping at each for about 5 seconds. Press the Channel

Switching Button until the LED light labeled AUTO is turned on and

starts blinking. Then, images from different Camera units (on different

channels) can be seen on the Monitor as the channels alternate.

LCD On/Off

This power saving feature is located on the side of the monitor. When the

monitor is switched to LCD “off” position and the camera remains on,

there will be no picture on the monitor screen but transmission continues.

This way the Monitor uses less power but is still operational as an

audio-only monitor. The Monitor will resume working with a clear

picture when the LCD is switched back to “on”.