User's Manual

JOYMAX MD-120FC User Manual

V1.01

1. Introduction

This MD-120FC-5148A ZigBee Module w/ uFL connector is a surface mount module with

52.84mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO

networking applications with minimum time to market and at the lowest cost. They remove the

need for expensive and lengthy development of custom RF board designs and test suites. The

modules provide a comprehensive solution with high radio performance and all RF

components included. All that is required to develop and manufacture wireless control or

sensing products is to connect a power supply and peripherals such as switches, actuators

and sensors, considerably simplifying product development.

1.1 Key Features

1.1.1 Module

 2.4GHz IEEE802.15.4 & ZigBee PRO Compatible

 2.7 -3.6V for SOC

 Sleep Current ( with Active Sleep Timer ) 2.6µA

 Receiver Sensitivity -98dBm

 TX Power +17.23dBm

 TX Current 130mA

 RX Current 30mA

 Dimension: 30*18*3.5mm

 Weight: 2.0g

1.1.2 Microcontroller

 32-Bit RISC CPU

 128KB RAM, 128KB ROM

 4-input 12-bit ADC, 2 12-Bit DACs, 2 Comparators

 3 Application Timer / Counters, 3 System Timers

 2 UARTs

 SPI Port with 5 Selects

 2-Wire Serial Interface

 4-Wire digtal audio interface

 19 GPIO

1.2 Applications

 Robust and secure low power wireless applications

 ZigBee PRO networks

 Home and commercial building automation

 Home networks

 Toys and gaming peripherals

 Industrial systems

 Telemetry and utilities (e.g. AMR)