User's Manual

TIGO MD102AD User Manual

V1.01

1. Introduction

This MD-102AD ZigBee PIFA Module is a surface mount module with 1mW output power that

enables users to implement IEEE802.15.4 or ZigBee PRO networking applications with

minimum time to market and at the lowest cost. They remove the need for expensive and

lengthy development of custom RF board designs and test suites. The modules provide a

comprehensive solution with high radio performance and all RF components included. All that

is required to develop and manufacture wireless control or sensing products is to connect a

power supply and peripherals such as switches, actuators and sensors, considerably

simplifying product development.

1.1 Key Features

1.1.1 Module

 2.4GHz IEEE802.15.4 & ZigBee PRO Compatible

 2.3 -3.6V for SOC

 Sleep Current ( with Active Sleep Timer ) 2.6µA

 Receiver Sensitivity -95dBm

 PIFA Antenna Gain +3dBi

 TX Power +2dBm

 TX Current 15mA

 RX Current 17.5mA

 Dimension：30 *18*3.5mm

 Weight：3.0g

1.1.2 Microcontroller

 32-Bit RISC CPU

 128KB RAM, 128KB ROM

 4-input 12-bit ADC, 2 12-Bit DACs, 2 Comparators

 3 Application Timer / Counters, 3 System Timers

 2 UARTs

 SPI Port with 5 Selects

 2-Wire Serial Interface

 4-Wire digtal audio interface

 21 GPIO

1.2 Applications

 Robust and secure low power wireless applications

 ZigBee PRO networks

 Home and commercial building automation

 Home networks

 Toys and gaming peripherals

 Industrial systems

 Telemetry and utilities (e.g. AMR)