User's Manual

Tigo MD100AB Data Sheet

1. Introduction

This MD100A ZigBee PIFA Module is a range of surface mount modules that enables users to

implement IEEE802.15.4 or ZigBee compliant systems with minimum time to market and at the lowest

cost. They remove the need for expensive and lengthy development of custom RF board designs and

test suites. The modules provide a comprehensive solution with high radio performance and all RF

components included. All that is required to develop and manufacture wireless control or sensing

products is to connect a power supply and peripherals such as switches, actuators and sensors,

considerably simplifying product development.

1.1 Key Features

1.1.1 Module

• 2.4GHz IEEE802.15.4 & ZigBee Compatible

• 2.7-3.6V Operation

• Sleep Current ( with Active Sleep Timer ) 2.6µA

• Receiver Sensitivity -96dBm

• TX Power +1.5dBm ( without PIFA Antenna )

• PIFA Antenna Gain +3dBi

• TX Current 37mA

• RX Current 37mA

• Dimension：18*30*3.5mm

• Weight：2.5g

1.1.2 Microcontroller

• 16MHz 32-Bit RISC CPU

• 96KB RAM, 192KB ROM

• 4-input 12-bit ADC, 2 11-Bit DACs, 2 Comparators, Temperature Sensor

• 2 Application Timer / Counters,

3 System Timers

• 2 UARTs (One for In-System Debug)

• SPI Port with 5 Selects

• 2-Wire Serial Interface

• 21 GPIO

1.2 Applications

• Robust and secure low power wireless applications

• Wireless sensor networks, particularly IEEE802.15.4 / ZigBee systems

• Home and commercial building automation

• Home networks

• Toys and gaming peripherals

• Industrial systems

• Telemetry and utilities (e.g. AMR)

V1.02