Instruction manual

6
7
HOW TO USE THE APPLIANCE
- Insert the batteries into the specific compartment, taking care to position
the polarities as shown.
- The manicure/pedicure set is now ready for use.
- Attach the desired accessory (depending on the operation you which to
perform, as specified below). A specific switch on the appliance allows you
to choose from two speeds in each direction.
Manicure/Pedicure
Immerge your hands in warm, soapy water. Dry carefully.
Disc to file and shorten nails
This accessory can shape and re-define even the thickest, hardened nails.
Regular use makes nails stronger and more hardwearing. Suitable for both
fingernails and toenails.
Polishing disc
To polish and refine the tips of the nails after filing, and to polish the nail surface.
Remove cuticles (fine-grain precision head)
To remove and raise hardened cuticles and to clean nails
Wide head for manicures
To treat and polish toenails
Slim polishing head (to remove calluses)
Allow the accessory to slide carefully over the areas to be treated. After
treatment, immerge feet (or hands) in water and apply a moisturising cream
or lotion (creams and lotions not supplied). For best results, wash feet before
beginning pedicure treatment
CLEANING THE PRODUCT
Before clearing the product, ensure that you have removed the batteries.
Never immerge the central unit in other liquids. Clean the central unit and
case with a soft cloth, slightly dampened with water. Never use other liquids
or abrasive detergents. Always dry carefully. To clean the accessories: use
a soft brush to remove any residues of skin and nails. The discs and conical
heads can be cleaned with a soft brush, dampened with alcohol (brush not
included)
TECHNICAL CHARACTERISTICS
Description: Manicure and pedicure set
2 speeds
Motor: output 3V / approximately 0.87 W, approximately 290 mA
Batteries: 2 x 1.5V AA (not included)
Weight: approximately 74 g (without accessories)
This item is made in conformity with all the applicable
European directives