Data Sheet

CCS811
Breakout-Board for air quality measurement
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
KEY FEATURES
Digital Interface I2C
Operating Voltage 3-5V
Dimensions 21 x 18 x 3 mm
Weight 1.2g
POLLUTANT DETECTION
Total Volatile Organic
Compunds (TVOCs)
0 - 1187 ppb
equivalent CO2-Level (eCO2) 400 - 8192 ppm
MODES OF OPERATION
Compatible to Arduino, Raspberry Pi
The CCS811 is a gas sensor that
monitors the air quality and can
measure a large number of volatile
organic compounds (VOCs).
The sensor data can be converted to
a total volatile organic compound
(TVOC) or carbon dioxide equivalent
(eCO2) level.
The module has a metal oxide
(MOX) sensor and also the option to
connect an NTC for temperature
measurement.
Published: 28.02.2019
Scope of delivery CCS811 Sensor
ADDITIONAL INFORMATIONS
Article No. SEN-CCS811V1
EAN 4250236817989
Other pollutants Metal Oxides (MOX)
Mode 0 Idle, Low Current Mode
Mode 1
Constant power mode
1 measurement per sec.
Mode 2
Pulse Heating Mode
1 measurement/10 sec.
Mode 3
Low Power Pulse Mode
1 measurement/60 sec.
Mode 4
Constant Power Mode
1 measurement/250 ms
Additional connections
Optional NTC for temp.
measurement
NOTE A single burn-in of 48 hours
and a warm-up time of 20 minutes is
recommended before valid data can be
expected.