Instructions
Published: 16.08.2019 Copyright by Joy-IT 3
3.2“ / 3.5“ Touch-Display
Dear customer,
Thank you very much for choosing our product.
In the following we will show you what has to be observed during commissioning and use. Should you
encounter any unexpected problems during use, please feel free to contact us.
Plug the 3.2"/3.5" TFT display onto the Raspberry Pi so that it is plugged onto the rst 26 pins of the GPIO
connector. Aer that the backlight of the display should already light up.
1. OVERVIEW
3.2“ Display 3.5“ Display
Controller XPT2046
Resoluon 320x240 480x320
Colors 65.536
2. CONNECTION