Instructions

Published: 16.08.2019 Copyright by Joy-IT 12
3.2“ / 3.5“ Touch-Display
For 16: 9 resoluons:
In the last step, the le "/usr/share/X11/xorg.conf.d/99-calibraon.conf" has to be edited again. Open the
le with the following command:
And change the following line there ...
... so that you change "1" back to "0" as in the original state (this is absolutely necessary in
framebuer copy mode):
hdmi_ignore_edid=0xa5000080
hdmi_force_hotplug=1
###########################################################################
#### Resolution settings - relevant group must be commented on ####
##### 16:9 #####
## Settings for 1280x720 ##
#hdmi_group=2
#hdmi_mode=87
#hdmi_cvt=1280 720 60 3 0 0 0
## Settings for 1600x900 ##
#hdmi_group=2
#hdmi_mode=87
#hdmi_cvt=1600 900 60 3 0 0 0
## Settings for 1920x1080 ##
#hdmi_group=2
#hdmi_mode=87
#hdmi_cvt=1920 1080 60 3 0 0 0
###############################