Manualshelf

Instructions

ManualsBrandsJoy-it ManualsDevelopment Kits & EducationJoy-it RB-TFT3.2-V2 Touchscreen unit 8.1 cm (3.2 ") 320 x 240 p Compatible with: Raspberry Pi Backlighting
123456789
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
2. OVERVIEW
3.2" Display 3.5" Display
Controller XPT2046
Resolution 320 x 240 480 x 320
Colors 65.536
3. CONNECTION
Put the 3.2" / 3.5" TFT- Display on the Raspberry Pi so that the first 26
pins of the GPIO pin header are plugged in. Aer that, the
backgroundlight of the display is turned on.
4. INSTALLATION OF THE SOFTWARE
Install the TFT-image on your SD-card with a program like the Win32-Disk-
Imager. You can download the images via the following links:
For the 3.2" display, you find the downloads here.
For the 3.5" display, you find the downloads here.