3 JOY-iT 10.1“ Touchscreen-Display Ausgabe 11.08.
3 JOY-iT 10.1“ Touchscreen-Display Index 1. Display-Setup 1.1 Building the display 1.2 Mounting a Raspberry Pi 2. Using the display 2.1 Installing the software 2.2 [Pro Part] Manually installing the display 2.3 Using with a Windows PC 3. Support Ausgabe 11.08.
JOY-iT 10.1“ Touchscreen-Display Dear customer, Thank you for purchasing our producht Please find our instructions below. 1. Display-Setup 1.1 Building the display First, take the display, the base and the base-socket of the display. Place the metal-rectangle of the base-socket into the matching lead of the display-case (near the USB label). Fix the base-socket by tightening the round fixing-plate, right in front of the metal-rectangle.
3 2. JOY-iT 10.1“ Touchscreen-Display Using the display 2.1 Installing the software Install, with the help of the „Win32 Disk Imager“-program, the FBTFT Image, which you can find here. Ausgabe 11.08.
3 JOY-iT 10.1“ Touchscreen-Display 2.2 [Pro Part] Manually installing the display Connect the display, as well as your Raspberry Pi, with the power supplies. Also connect the display and the Rasperry Pi with a HDMI-cable. You can also connect the shipped USB-cable if you would like to use the touchscreen-features. Using the touchscreen-features needs additional configurations. At first you need to install the drivers.
3 JOY-iT 10.1“ Touchscreen-Display Now you can start the calibration tool: xinput_calibrator You will now see 4 points on the display which needs to be pressed one after another. After that, four values will be printed which you need to use as new calibration data. Example: Section “InputClass“ Identifier “calibration“ MatchProduct “eGalax Inc.
3 2.3 JOY-iT 10.1“ Touchscreen-Display Using with a Windows PC Connect the display with the shipped power supply. Connect the computer and the display with a HDMI or a VGA cable. You can also connect an USB cable to the Verbinden Sie das Display mit dem beiliegendem Stromkabel. Verbinden Sie nun Ihren Computer und das Display, je nach Präferenz, mit einem HDMI– oder VGA-Kabel.
3 2.3 JOY-iT 10.1“ Touchscreen-Display Using with a Windows PC Connect the display with the shipped power supply. Connect the computer and the display with a HDMI or a VGA cable. You can also connect an USB cable to the Touch Interface if you would like to use this feature. In that case, an additional driver installation is needed. You can find these drivers on this website. Ausgabe 11.08.
3 3. JOY-iT 10.1“ Touchscreen-Display Support Wir sind auch nach dem Kauf für Sie da. Sollten noch Fragen offen bleiben oder Probleme auftauchen stehen wir Ihnen auch per E-Mail, Telefon und Ticket-Supportsystem zur Seite. E-Mail: service@joy-it.net Ticket-System: http://support.joy-it.net Telefon: +49 (0)2845 98469 – 66 (11- 18 Uhr) Für weitere Informationen besuchen Sie unsere Website: www.joy-it.net Ausgabe 11.08.
