Instructions

3.3 Usage with a desktop PC
Connect the display with the provided power supply.
Then, connect your computer with the display, using
an HDMI– or VGA-cable, depending on your preference.
You can further connect your computer with the Touch
interface using the USB cable, if the operation via
Touchscreen is desired.
This requires an additional driver installation though.
The drivers for the Touch function can be found on this
website.
In order to ensure the touch function of the display
even when using several screens, the multiple monitor
function must be activated in the eGalax Touch pro-
gram.
For this, please first open the program:
!
Attention! On some systems, it may happen
that the the lastest drivers are not fully func-
tional. In this case, better results can be
achieved with older drivers. You can download
an older driver here.