3 Port-Doubler
Port-Doubler TABLE OF CONTENTS 1. Introduction 2. Installation 3. Usage 5. Information and take-back obligations 6. Support Published: 06.08.
Port-Doubler 1. INTRODUCTION Dear customer, thank you for choosing our product. In the following, we will show you what to observe during commissioning and use. Should you encounter any unexpected problems during use, please do not hesitate to contact us. 2. INSTALLATION Simply plug the port doubler onto your Raspberry Pi as shown in the picture. In addition, use the marked spacers and screw them tight for maximum stability. Published: 06.08.
Port-Doubler 3. USAGE The port doubler is now ready for use. An additional driver installation is not necessary. This expansion board quadruples your GPIO bar. Each pin is now available four times. 1 3.3V DC 2 5V DC 3 GPIO 2 (SDA1, I2C) 4 5V DC 5 GPIO 3 (SCL1, I2C) 6 Ground 7 GPIO 4 8 GPIO 14 (TXD0) 9 Ground 10 GPIO 15 (RXD0) 11 GPIO 17 12 GPIO 18 13 GPIO 27 14 Ground 15 GPIO 22 16 GPIO 23 17 3.
Port-Doubler 4. INFORMATION- AND TAKE-BACK OBLIGATIONS Symbol on electrical and electronic equipment This crossed-out dustbin means that electrical and electronic equipment does not belong in household waste. You must return the old devices to a collection point. Before disposal, you must separate old batteries and accumulators which are not enclosed in the old device.
Port-Doubler 5. SUPPORT We also support you after your purchase. If there are any questions left or if you encounter any problems, please feel free to contact us by mail, phone or by our ticket -system on our website. E-Mail: service@joy-it.net Ticket-System: http://support.joy-it.net Phone: +49 (0)2845 98469 – 66 (11- 18 o‘clock) Please visit our website for more informations: www.joy-it.net Published: 06.08.
