Instructions

Ausgabe 13.10.2017 Copyright by Joy-IT 12
3
5. Servo/GPIO Connecons
5.1 Servo-Usage
The marked connecons can be used with up to 6 servo motors.
You can switch with the jumper, placed next to the connecons, between GPIO– and servo-operaon.
Just connect the centered and the right PIN with the jumper to acvate the servo-mode.
Please note that you need and addional power supply to use the servo motors.
Therefore connect the coaxial power connector (5.5 / 2.1mm, 4.8 - 6V, 6A max.) to the connector next to
the speaker connecon.
To test the servos, navigate to the Adafruit_Python_PCA9685/examples folder.
You can start the example with the following command:
Talking-Pi
sudo python simpletest.py