User manual

Ausgabe 07.12.2016 Copyright by Joy-IT 20

RPi - Explorer700

 python program:

When using this python program to control the OLED, you need to install another library python-

imaging. To install the python-imaging library, you should connect the RPi to the network, and use the

line below:

Expected result: Entering the following commands under the Terminal to execute the program, you

will get dierent displayed informaon.

For more detailed informaon, please refer to the relave Raspberry Pi documents.

pi@raspberrypi ~/Explorer700/OLED/python $ sudo python waveshare.py

pi@raspberrypi ~/Explorer700/OLED/python $ sudo python oled.py

sudo apt-get python-imaging

pi@raspberrypi ~/Explorer700/OLED/python $ sudo python animate.py

pi@raspberrypi ~/Explorer700/OLED/python $ sudo python image.py

pi@raspberrypi ~/Explorer700/OLED/python $ sudo python dispchar.py