Data Sheet

Thermal Module

Introduction

The Linker Thermal Module uses a Thermistor to detect the ambient temperature. The

resistance of a thermistor will increase when the ambient temperature decreases. It's this

characteristic that we use to calculate the ambient temperature.

PAGE 1
Thermal Module Introduction The Linker Thermal Module uses a Thermistor to detect the ambient temperature. The resistance of a thermistor will increase when the ambient temperature decreases. It's this characteristic that we use to calculate the ambient temperature.
PAGE 2
PAGE 3
Application Ideas //TMP36 Pin Variables int sensorPin = 0; //the analog pin the TMP36's Vout (sense) pin is connected to //the resolution is 10 mV / degree centigrade with a //500 mV offset to allow for negative temperatures /* * setup() - this function runs once when you turn your Arduino on * We initialize the serial connection with the computer */ void setup() { Serial.
PAGE 4