Manualshelf

Data Sheet

ManualsBrandsJoy-it ManualsBreakout BoardsRelai mit JST-HX254 Stecker LK-Relai pcDuino, Arduino, Raspberry Pi®
123
Application Ideas
test
/*
Linker Relay
the Relay will turn on for 0.5s and then turn off for 0.5s, and so on.
This example code is in the public domain.
*/
int RelayControlPin = 13;
void setup() {
// initialize the digital pin as an output.
// Pin 13 has an LED connected on most Arduino boards:
pinMode(RelayControlPin, OUTPUT);
}
void loop() {
digitalWrite(RelayControlPin, HIGH); // set the LED on
delay(500); // wait for a second
digitalWrite(RelayControlPin, LOW); // set the LED off
delay(500); // wait for a second
}