Data Sheet

Rotary Potentiometer Module

Introduction

The Linker Rotary Potentiometer Module produces analog output between 0 and Vcc (5V DC

with Arduino) on its D1 connector. The D2 connector is not used. The angular range is 300

degrees with a linear change in value. The resistance value is 10kΩ, perfect for Arduino use.

PAGE 1
Rotary Potentiometer Module Introduction The Linker Rotary Potentiometer Module produces analog output between 0 and Vcc (5V DC with Arduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10kΩ, perfect for Arduino use.
PAGE 2
PAGE 3
Application Ideas test int adcPin = A0; int ledPin = 5; int adcIn = 0; // select the input pin for the potentiometer // select the pin for the LED // variable to store the value coming from the sensor void setup() { Serial.begin(9600); // init serial to 9600b/s pinMode(ledPin, OUTPUT); // set ledPin to OUTPUT Serial.