0,1 " LCD DISPLAY VERSION B RB-LCD-10B 1. GENERAL INFORMATION Dear customer, Thank you for purchasing our product. In the following, we will show you which things should be noted during the use. Should you encounter any unexpected problems, do not hesitate to contact us. www.joy-it.net Pascalstr.
. MOUNTING BRACKET Simply follow the following illustrated step-by-step instructions for quick and easy mounting of the bracket. 1. First, loosen the screws of the protective cover and remove it. 2. Now, remove the protective film from the feet. 3. Now, you first have to remove the spacers, which are on the screws, with which the board is fixed. Afterwards, you can put the feet on the board by lifting the board. Make sure that the leg with the larger cut-out is placed on the side with the connectors.
4. Now, remove the protective film of the protective cover. 5. Now fix the spacers with the supplied nuts to the openings provided for them. Note that the numbers on the cover represent the different single board computers compatible with the display. 6. After you put the spacers you removed earlier, back on the board, put the cover plate back on the board and fasten the screws. www.joy-it.net Pascalstr.
7. Now you can screw your single-board computer onto this plate. 3. USAGE WITH A PC This product supports Windows 7 / 8 / 8.1 / 10 operating systems For Windows operating systems 8 and above, multi-touch gestures with up to 10 points are supported. For some Windows 7 operating systems, only single-touch gestures are supported. 1. Device connection Please make sure that the connections are in the correct sequence or the or the LCD may not work flawlessly. 1.
4. USAGE WITH A RASPBERRY PI 1. Installation Basic installation For the Windows operating systems on the PC, the resolution of the LCD is automatically identified. Therefore, no further settings of this type can be made. When working with the Raspberry Pi you should set the resolution manually, otherwise, the LCD screen will not work. For more detailed information please read the following section.
Rotation of the display with touch function Display Rotation To rotate the image, you need to edit the config.txt. sudo nano /boot/config.txt The following command must now be entered at the end of the file: display_rotate=1 Note: Depending on how you want to rotate the display, you must enter the following values: 90° display_rotate=1 180° display_rotate=2 270° display_rotate=3 If you want to have the initial state, you must remove the command from the config.txt.
Note: Depending on how you want to rotate the display, you must enter the following values : 90° Option "CalibrationMatrix" "0 1 0 -1 0 1 0 0 1" 180° Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1" 270° Option "CalibrationMatrix" "0 -1 1 1 0 0 0 0 1" If you want to have the initial state, you simply remove the command. As soon as you are finished, the Raspberry Pi must be restarted. It should then restart with the setting you have set. sudo reboot www.joy-it.net Pascalstr.
2. Device connection 3 4 3 1 2 4 1. 2. 3. 4. 2 Connect Power Only Interface of the LCD to a 5 V 2.4 A microUSB power supply. (Normally, the LCD will reset the output on the display and perform a self test). Connect the HDMI interface of the LCD with the HDMI interface of your Raspberry Pi with a HDMI cable. Connect the touch interface of the LCD to one of the USB interfaces of your Raspberry Pi.
5. USAGE WITH A BANANA PI 1. Working with Raspbian OS Install the image file Raspbian for Banana Pi. This image file supports BananaPi Pro and BananaPi. 1. 2. 3. Download the packed image file to your PC. After extracting, you will receive a file with the extension .img. Connect a microSD card to your PC and format the card with the program Win 32 Disk Imager. Note: The memory size of your microSD card should be more than 4GB.
6. OTHER INFORMATION PR Our Information and Take-back Obligations according to the German Electronic Law (ElektroG) Symbol on Electrial and Electronic Products: This crossed-out bin means that electrical and electronic products do not belong into the household waste. You must hand over your old appliance to a registration place. Before you can hand over the old appliance, you must remove used batteries and replacement batteries which are not enclosed by the device.
