User manual

POSCOPE4 AND MEGA1+ MANUAL
74
www.poscope.com
LEGAL NOTES
1. All information included in this document is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
2. PoLabs does not assume any liability for infringement of patents, copyrights, or other
intellectual property rights of third parties by or arising from the use of PoLabs products or
technical information described in this document. No license, express, implied or otherwise, is
granted hereby under any patents, copyrights or other intellectual property rights of PoLabs or
others. PoLabs claims the copyright of, and retains the rights to, all material (software,
documents, etc.) contained in this release. You may copy and distribute the entire release in its
original state, but must not copy individual items within the release other than for backup
purposes.
3. Descriptions of circuits, software and other related information in this document are provided
only to illustrate the operation of the products and application examples. You are fully
responsible for the incorporation of these circuits, software, and information in the design of
your equipment. PoLabs assumes no responsibility for any losses incurred by you or third
parties arising from the use of these circuits, software, or information.
4. PoLabs has used reasonable care in preparing the information included in this document, but
PoLabs does not warrant that such information is error free. PoLabs assumes no liability
whatsoever for any damages incurred by you resulting from errors in or omissions from the
information included herein.
5. PoLabs devices may be used in equipment that does not impose a threat to human life in case
of the malfunctioning, such as: computer interfaces, office equipment, communications
equipment, test and measurement equipment, audio and visual equipment, home electronic
appliances, machine tools, personal electronic equipment, and industrial robots.
6. Measures such as fail-safe function and redundant design should be taken to ensure reliability
and safety when PoLabs devices are used for or in connection with equipment that requires
higher reliability, for example: traffic control systems, anti-disaster systems, anticrime systems,
safety equipment, medical equipment not specifically designed for life support, and other
similar applications.
7. PoLabs devices shall not be used for or in connection with equipment that requires an
extremely high level of reliability and safety, as for example: aircraft systems, aerospace
equipment, nuclear reactor control systems, medical equipment or systems for life support
(e.g. artificial life support devices or systems), and any other applications or purposes that
pose a direct threat to human life.
8. You should use the PoLabs products described in this document within the range specified by
PoLabs, especially with respect to the maximum rating, operating supply voltage range and
other product characteristics. PoLabs shall have no liability for malfunctions or damages arising
out of the use of PoLabs products beyond such specified ranges.
9. Although PoLabs endeavors to improve the quality and reliability of its products,
semiconductor products have specific characteristics such as the occurrence of failure at a
certain rate and malfunctions under certain use conditions. Further, PoLabs products are not
subject to radiation resistance design. Please be sure to implement safety measures to guard
them against the possibility of physical injury, and injury or damage caused by fire in the event
of the failure of a PoLabs product, such as safety design for hardware and software including