User manual

POSCOPE4 AND MEGA1+ MANUAL
72
www.poscope.com
TECHNICAL SPECIFICATIONS FOR MEGA1(+)
Oscilloscope
No. of channels
2 channels
Sample rate
1.0 MS/s (dual channel)
2.5 MS/s (single channel)
Input voltage
-20 V … +20 V
WARNING: Do not connect the oscilloscope
to voltages higher than specified.
ADC resolution
12 bits
Triggering
Rising, falling, any
Spectrum analyzer
No. of channels
2 channels
Sample rate
1.0 MS/s (dual channel)
2.5 MS/s (single channel)
Input voltage
-20 V … +20 V
ADC resolution
12 bits
Window functions
Hamming
Hanning
Blackman
Blackman-Harris, etc.
Recorder
No. of channels
2 channels
Sample rate
200kS/s (dual channel) 12-bit mode
500kS/s (single channel) 12-bit mode
500kS/s (dual channel) 8 bit mode
1MS/s (single channel) 8 bit mode
Input voltage
-20 V … +20 V
ADC resolution
12 bits
Triggering
Rising, falling, any
Advanced functions
Waveform record, Direct recording to PCM
Logic analyzer
No. of channels
16 channels
Input voltage
0 … 5.0 V
Triggering
Edge, level, mask (coming soon)
Decoding
I2C, I2C sensors, UART, SPI (1-WIRE coming
soon)
Function generator
No. of channels
1 channel
Waveforms
Sine, square, saw, triangle
Max. signal frequency
12,5 kHz
Physical characteristics
Dimensions (w x d x h)
92mm x 74 x 23mm (incl. connectors)
Weight
76 grams
Connections
3x coaxial BNC connector
1x standard D-sub 25, female
1x standard USB type B, female
Current consumption
ONLY 60 mA