User manual

POSCOPE4 AND MEGA1+ MANUAL
73
www.poscope.com
TECHNICAL SPECIFICATIONS FOR MEGA50
Oscilloscope
No. of channels
2 channels
Sample rate
48MHz
Bandwidth
15MHz
Input voltage
-30 V … +30 V
WARNING: Do not connect the oscilloscope to voltages higher
than specified.
ADC resolution
8 bits
Triggering
Rising, falling, any
Spectrum analyzer
No. of channels
2 channels
Sample rate
48MHz
Input voltage
-30 V … +30 V
ADC resolution
8 bits
Window functions
Hamming, Hanning, Blackman, Blackman-Harris, etc.
Recorder
No. of channels
2 channels
Sample rate
15MHz
Input voltage
-30 V … +30 V
ADC resolution
8 bits
Triggering
Rising, falling, any
Advanced functions
Waveform record, Direct recording to PCM
Logic analyzer
No. of channels
16 channels
Sample rate
48MHz
Bandwidth
5MHz
Input voltage
0 … 5.0 V
Triggering
Edge, level, mask (coming soon)
Decoding
I2C, I2C sensors, UART, SPI (1-WIRE coming soon)
Function generator
No. of channels
1 channel
Waveforms
Sine, square, saw, triangle
Max. signal frequency
12,5 kHz
Physical characteristics
Dimensions (w x d x h)
92mm x 74 x 23mm (incl. connectors)
Weight
76 grams
Connections
3x coaxial BNC connector
1x standard D-sub 25, female
1x standard USB type B, female
Current consumption
Only 150mA